Boski Gel Polish 7Ml

CURING TIME

• MULTILED lamp: 30 seconds

ADVANTAGES

• pleasant streak-free application
• minimize risk of crusting the cuticles
• creamy texture

APPLICATION TIPS

• Be sure to disinfect your hands (your own and your customers') first. Put on gloves, then assess the condition of the hands and nails and check for any contraindications to the treatment.
• Move the cuticles away (with a buffer or a swab), then work them out with a drill bit (for example, Cuticle 9).
• Take care to mattify the nail plate using a 100/180 gradient buffer and remove the dust produced with a soft brush.
• Soak the dust-free cotton swab with purple Cleaner and thoroughly degrease the nail plate.
• Apply primer - in 90% per cent of cases reach for Acid Free Primer.
• Apply a thin layer of the selected hybrid base and cure it for 30 seconds in the MultiLed lamp.
• If the nails are weak or naturally flat, you can apply two layers of Protein Base, Mineral Base or Whitemin Base.
• When the surface of the base needs to be worked with a file, remove the tacky layer from the nails with a cotton swab soaked in Wipe Off Cleaner.
• Even out the base surface with a 100/180 file or a buffer of the same gradation.
• Remove the dust with a soft brush and clean the surface again with a purple Cleaner or Wipe Off Cleaner.
• Apply Boski gel polish. Two layers of color are required for full coverage.
• Cure each of them for 30 seconds in the MultiLed lamp.
• To perfectly finish the look, reach for a properly selected top (for example, Tip Top or Wet Look).
• Cure top 30-60 seconds in a MultiLed lamp.
• Wait about 1 minute after removing your hand from the lamp.
• If you have used a tacky layer, wipe each nail with a dust-free cotton swab soaked in Shea Super Shine Effect Cleaner.
• Do you want the look to be even more shiny? Polish your nails with a dry cotton swab!