Greensetter 2.0 Gel Polish 7Ml

Greensetter 2.0 Gel Polish 7Ml


4 in stock

Do you want to meet our next trendsetter? Here it is – Greensetter 2.0! This time in a shade of juicy, neon green that will complete the summer (and not only) look of every fashionista. Do not resign from fashion trends and invite colours loved by designers to your nails (and to your wardrobe!)



Indigo Nails product lines are for professional use only and are to be used for the purpose intended by a qualified and insured person of adult age. This means Indigo Nails will accept no responsibility if the products are incorrectly used and cause any harm or damage.

4 in stock

Have a question?



  • Consistency: creamy.
  • Coverage level: full after two coats.
  • Sticky layer (i.e. inhibitory): present.
  • Colour: green.
  • Shade: bright, neon green.


  • Thanks to its creamy consistency the gel polish does not create streaks on the nails.
  • Minimizes the risk of flooding the cuticles.
  • Lets you create a manicure that lasts up to 4 weeks.
  • It has a safe formula – just like all Indigo gel polishes.
  • Thanks to it, you will always be trendy!

Application tips

  1. Remember to disinfect your hands and your customer’s hands first. Put on gloves, then assess the condition of your customer’s hands and nails, and check if there are any contraindications to the procedure.
  2. Push back the cuticles (using a cuticle pusher or a stick), then work around them using a bit (e.g. Cuticle 9).
  3. Matt the nail plate with a 100/180 gradation buffer, and remove the dust with a soft brush.
  4. Soak a lint-free cotton swab with purple Cleaner and carefully dehydrate each plate.
  5. Apply primer –  in 90% it will be Acid Free Primer.
  6. Apply a thin layer of the selected gel base and cure in the MultiLed lamp for 30 seconds.
  7. If the nails are weak or naturally flat, you can apply two coats Protein Base, Mineral Base or Whitemin Base.
  8. When the surface of the base requires processing with a file, remove the sticky layer from the nails with a cotton pad soaked in Wipe Off Cleaner.
  9. Even out the base surface with a 100/180 file or a buffer with the same gradation.
  10. Remove dust with a soft brush and clean the surface with purple Cleaner or Wipe Off Cleaner.
  11. Apply Greensetter 2.0 nail polish. Two coats of colour are required to achieve full coverage.
  12. Cure of layer for 30 seconds in the MultiLed lamp.
  13. In order to finish the design perfectly, reach for the appropriately selected top (e.g. Tip Top or Wet Look).
  14. Cure the top for 30-60 seconds in the MultiLed lamp.
  15. After removing the hands from the lamp wait for approx. 1 minute.
  16. If you used a top coat with a sticky layer, wipe each nail with a dust-free cotton swab soaked in Shea Super Shine Effect Cleaner.
  17. If you wish to make your design even shinier, additionally polish your nails with a dry cotton swab!
Go to Top